Comfy

ELECTRIC COW BRUSH

Cosy Titan

The powerful cow brush with a longer brush and a heavier gearbox. Improves the welfare of your cows.

The technology

Length comparison of the nylon brush: the Cosy Cow (560 mm) at the top and the Cosy Titan with extended nylon brush (730 mm) below

Longer brush, bristles that keep their resilience.

The Cosy Titan has a longer brush than the Cosy Cow, made of high-quality nylon deliberately chosen over cheaper alternatives: bristles that keep their shape after thousands of brushing sessions. The nylon bristles are also longer at the sides of the brush, so the brush follows the shape of the cow and reaches every corner.

What you notice

The brush stays as effective as on day one.

How the flow-start system works

01

Starts on movement

As soon as the cow pushes against the brush, the PCB registers the tilt. The motor starts immediately, without a button or timer.

Installation? Simple.

Download manual (PDF)

Mount on:

It does not matter where the Cosy Titan is attached: brick, concrete, an I-beam, or a steel post — as long as the underlying structure is sturdy enough, the cow brush can be mounted anywhere. To walls using wall anchors or expansion bolts, to posts with bolts and nuts or U-brackets. Thanks to our modular design, installation is also simple, requiring no specialized tools or technical knowledge.

Due to the wide variety of mounting options, the wall or post mounting hardware is not included as standard, but the design fully accounts for this. The required materials are commonly available everywhere.

Placement and group size

Where the brush is located determines how often it is used.

A few practical principles apply to the placement: Preferably choose a junction (1) or end wall (2) in the barn: there is usually sufficient space here without the brush blocking the walkway. Do not place the brush in a dead-end corner (3), so that a cow can always move away from a dominant animal. Additionally, ensure there is enough space for other cows to pass the brushing cow; how much space is exactly required depends on the size of the cows in the herd. A Comfy dealer or barn builder will be happy to assist you in planning the layout of the barn.

Passage needed? Swing the brush aside.The swing-away system is an add-on that you purchase separately and can be mounted on virtually every Comfy brush. This allows you to rotate the brush 90 degrees to the side, ensuring work and machinery can pass freely.View the swing-away system →

Animal welfare is paramount

Cows at the feeding area in a barn with an electric cow brush

Less mastitis, more milk.

A study by Cornell University tracked four comparable groups of cows on an American dairy farm for six months, both with and without a mechanical cow brush. In second-lactation cows, daily milk production increased by approximately 3.5%. The incidence of clinical mastitis (udder infection) decreased by 34% in second and later lactations. From the moment the brushes were active, the cows used them intensively. What you will notice Healthier cows, fewer cases of mastitis, and a measurable increase in milk production in a portion of the herd.

+3.5 %
MORE MILK
-34%
LESS MASTITIS
DIMENSIONS
SWING RANGE

Technical specifications

Dimensions
1200 × 820 × 390 mm
Brush diameter
ø 390 mm
Brush length
On request
Weight
On request
Power consumption
0,12 kWh
Power supply
110V 60Hz / 230V 50Hz
Speed
58 rpm
Movement
Swinging
Direction of rotation
Clockwise & counter-clockwise
Flowstart system
Starts as soon as the brush is moved
Safety
Rotation direction reverses upon overload

FAQ

Frequently Asked Questions

The Cosy Titan itself has no technical limit on the number of cows per brush. In practice, the maximum depends primarily on local regulations, dairy factory standards, or other welfare requirements — not on the brush itself.

Preferably choose a junction or an end wall in the barn: these areas usually provide enough space without the cow brush blocking the traffic route. Avoid dead-end corners so a cow can always move away from a dominant animal. Additionally, ensure there is enough room for other cows to pass the cow being brushed — the exact amount of space depends on the size of the cows in the herd. A Comfy dealer or barn designer would be happy to advise on the barn layout.

As a rule of thumb: mount the bottom of the wall plate approximately 15 cm above the shoulder height of the cows in your herd.

Thanks to the efficient 24V, 3-phase motor, the brush consumes on average only 0.12 kWh under normal load. Low energy consumption, even with intensive use of up to 18 hours per day.

The Cosy Titan is equipped with a UHP-350-24 power supply, capable of handling a wide voltage range from 90V to 250V. As a result, the cow brush effortlessly absorbs voltage dips and peaks — caused, for example, by a weak power grid, solar panels, or other equipment on the same connection. Stable operation, regardless of the quality of your mains power.

The built-in overload protection ensures that the cow brush automatically rotates in the opposite direction, releasing the tail by itself. Safety is built-in as standard.

Our brushes operate an average of 18 hours per day, year in and year out, without maintenance. That is why we provide a 3-year warranty — an investment that more than pays for itself.

No. The Cosy Titan is delivered plug-and-play and has a modular design. Installation is easy, even without technical knowledge.

Yes. Thanks to the flow-start system, the cow brush always starts automatically in the correct direction of rotation, regardless of which side the animal approaches from. Furthermore, the brush can rotate both clockwise and counter-clockwise, which ensures even load on the bristles and extends the lifespan.